|
| |
Show Me/Tell Me Questions
Q1. Open the bonnet, identify where you would check the engine coolant level and
tell me how you would check the engine has the correct level.
Identify the coolant tank and check the min/max markings. If the coolant is
below the min mark then more coolant will need to be added. To do this, unscrew
the cap and pour in coolant until the max mark is reached.
Q2. Open the bonnet, identify where the brake fluid
reservoir is and tell me how you would check that you have a safe level of
hydraulic brake fluid.
Identify the brake fluid reservoir and check the fluid level against the min/max
levels.
Q3. Show me/explain how you would check that the power assisted steering is
working before starting a journey.
If the steering becomes heavy the steering may be
faulty. Before starting a journey two simple checks can be made. 1) Gentle
pressure on the steering wheel, maintained whilst the engine is started, should
result in slight but noticeable movement as the system begins to operate. 2)
Turning the steering wheel after just moving off will give an immediate
indication that the power assisted steering is functioning correctly.
Q4. Show me how you would check that the brake lights are
working on this car. (I can assist you, if you need to switch the ignition on,
please don't start the engine).
Activate the brake pedal and make use of reflections in garage doors etc to see
if the brake lights come on or ask someone to help.
Q5. Open the bonnet identify, where you would check the engine oil level and
tell me how you would check that the engine has enough oil.
Identify the dipstick, pull it out and check the oil level against the min/max
markings.
Q6. Show me how you would check that the horn is working (off road only).
Press the horn and listen (turn on ignition if necessary).
Q7. Show me how you would check that the brake lights are working on this car.
(I can assist you, if you need to switch the ignition on, please don't start the
engine).
Operate brake pedal, make use of reflections in windows, garage doors, etc, or
ask someone to help. (may need to switch ignition on, prompt not to start
engine)
Q8. Tell me how you would check that the brakes are
working before starting a journey.
As you move off check the brakes. They should not feel spongy and the car should
not pull to one side.
Q9. Tell me how you would check that the headlights and tail lights are working.
Turn on lights (turn ignition if necessary), walk around car and check that the
lights are on.
Q10. Show me how you would check that the direction indicators are working
correctly.
Activate the indicators or hazard warning lights and walk around the car to see
if all the indicators are working correctly.
Q11. Tell me where you would find the information for the recommended tyre
pressures for this car and how tyre pressures should be checked.
Information will be found using the car manufacturer's manual. Check the tyre
pressures by using a reliable pressure gauge when the tyres are cold. Don't
forget the spare and remember to refit the valve caps.
Q12. Tell me how you would check the tyres to show that they have sufficient
tread depth and that their general condition is safe to use on the road.
A safe tyre will have no cuts or bulges. The tread depth should be at least
1.6mm across the central 3/4's of the width of the tyre and around the entire
outer circumference.
Q13. Show me how you would check the parking brake for excessive wear.
Apply the parking brake. When it is fully applied it should secure itself, but
shouldn't be at the end of it's working travel
Q14. Tell me how you make sure your head restraint is
correctly adjusted so it provides the best protection in the event of a crash.
The head restraint should be adjusted so the rigid part of the head restraint is
at least as high as the eye or top of the ears, and as close to the back of the
head as is comfortable. N.B. Some restraints might not be adjustable.
Q15. Show me how you would clean the windscreen using the windscreen washer and
wipers .
Operate control to wash and wipe windscreen (turn ignition on if necessary.
Q16. Show me how you would set the demister controls to
clear all the windows effectively, this should include both front and rear
screens.
Set all relevant controls including; fan, temperature, air direction / source
and heated screen to clear windscreen and windows. Engine does not have to be
started for this demonstration.
Q17. Tell me how you would know if there was a problem with your anti lock
braking system.
Warning light should illuminate if there is a fault with the anti lock braking
system.
Q18. Show me how you switch your headlight from dipped to main beam and explain
how you would know the main beam is on whilst inside the car.
Operate switch (with ignition or engine on if necessary), check with main beam
warning light.
Q19. Show me how you would switch on the rear fog light/s and explain when you
would use them. (No need to exit vehicle).
Operate switch (turn on dipped headlights and ignition if necessary). Check
indication light is on, these should be used when visibility is very poor, i.e
less than 100m.
|
